Cold-Shrinkable Casing Silicone Built-In Cement Communication Base Station Feeder Din Head N Head 4G5G Waterproof Device

Product information:

Product name: Cold shrink tube

Waterproof rating: IPX8 (1m, 4 hours)

Elongation at break: ≥850%

Tear strength: ≥35 KN/m

Tensile strength: ≥9.0Mpa.

Ozone aging: no water, no change, no cracking|

UV aging: ≥480 hours, no obvious deformation

Low temperature brittleness: no cracks or breaks

Electric breakdown: strength>12kv/mm

Sleeve material: polymer solid silicone rubber

Connector model: N-type female

Material: Silicone rubber

Size information:

40*140mm

Note:

Casing specification requirements: before expansion or contraction, the product must have 1/2 feeder and Din connector, inner diameter sealed and waterproof structure, that is, the inner diameter of the silicone tube before or after expansion or contraction is less than 11mm, which is smaller than the feeder, and the length More than 70mm. The inner diameter of the tube is greater than or equal to the feeder’s 16mm and smaller than the feeder connector, the length is greater than or equal to 70mm, the wall thickness of the silicone tube is greater than or equal to 3.5mm, the total length of the product is greater than or equal to 140mm, the inner diameter of the product after expansion or contraction is greater than or equal to 40mm, and the length is greater than or equal to 140mm. The product does not need to be equipped with filler mortar or waterproof tape, and is mainly based on specific product renderings.

Application field: communication base station

Packing list :

Cold shrink tubing*1

Product picture: